240LG-2 Trash Can

Rated capacity: 240 liters (9.2 kg), the deviation between actual capacity and rated capacity should be within 0~5% positive deviation. Dimensions: Length 740mm × Width 580mm × Height 1100mm (including lid), lid-included height: 1070mm. Thickness requirements: Lid ≥ 4mm, bottom ≥ 5mm, wall thickness ≥ 6mm. Barrel body weight ≥ 9.2kg, lid weight ≥ 1.2kg, barrel with lid and axle weight ≥ 13.0kg. Solid axle: 1.35kg, hollow axle: 0.30kg, wheels ≥ 2.4kg. Material: New high-density polyethylene (HDPE).

2. Product Requirements:
(1) Appearance performance: Smooth and even surface, free from bubbles, ripples, impurities, sand holes, black spots, or cracks. The color of the plastic garbage bin body and lid must be consistent for the same batch, and there should be no noticeable deformation at the closing parts.
(2) The product is made from new high-density polyethylene (HDPE) material through one-time injection molding, with high-quality reinforcement and UV inhibitors added. The pigment content is 5% to ensure bright color and long-lasting fade resistance. The aging resistance of the barrel should comply with GB/T 16422.2 requirements, with sufficient mechanical strength and good impact toughness.

(3) The front and back of the barrel feature longitudinal concave designs, enhancing toughness, load-bearing capacity, and stability. Additionally, the top outer edge has 13 longitudinal reinforcement ribs with a thickness of no less than ≥6mm.

(4) Anti-slip design at the bottom on one side of the barrel back.

(5) The bottom has 28 wear-resistant pins, with a mesh design around the perimeter and a concave-convex shape in the center, dimensions: 210mm × 200mm.

(6) Four reinforcement ribs on each side of the barrel.

(7) Thirteen reinforcement ribs around the barrel body and eight on the handle.

(8) Four reinforcement designs on the front of the lid; six reinforcement designs on the back of the lid.

(9) The front opening of the barrel must be compatible with the tipping mechanism of side-loading garbage trucks. The tipping part is thickened, with a depth of ≥40mm at the hanger point, ensuring secure attachment to the vehicle’s lifting frame and reducing the risk of detachment during operation. Reinforcement ribs are added to the tipping area to prevent loosening, deformation, or breakage during the tipping process.
(10) Connection between rubber wheels and bottom axle: Direct insertion with anti-theft and anti-retreat features. The axle is made of galvanized solid steel with anti-corrosion treatment. The wheel hub and rim are made of high-density polyethylene, with a solid hub design. Hub diameter ≥190mm, wheel face width ≥25mm, each wheel has a load capacity of over 50kg. 
(11) Product compliance standard: "Chinese Urban Construction Industry Standard—General Technical Conditions for Plastic Garbage Bins," standard number CJ/T 280—2008.